Rebalers

REBALE HAY THE EASY WAY

Tease apart your large round bales in less than 5 minutes to convert them into small square bales! Make your rebaling operation more efficient and more profitable with huge time, labour cost and fuel savings.

EZ REMOTE FOR REBALING

Hustler’s bale processors are the perfect addition to rebaling and hemp processing operations. 

Add an EZ Remote hydraulic control arm to any Hustler mounted machine, these are developed specifically for the use of rebaling, breaking down bales for mixer wagons, and processing hemp, providing huge savings in both time and diesel.

3 REASONS TO REBALE HAY

There are many time, storage and cost saving benefits of producing large round bales in the paddock then converting them to small squares, on demand which are more salable and higher value. It may sounds like just extra effort and time, but rebaling grass and straw proves a profitable trend for many producers.

1. Increase the value of your feed

The average price* for hay in large round bales is $50 to $60 per ton which is very near the cost of production. But when the same hay is put up into small square bales, the price can go up to $150 per ton, especially when marketed to horse owners who often don’t have the time, equipment and storage to make their own hay. 

A 800-pound round bale valued at $40 would yield 19 small square bales weighing 40 pounds valued at $3.25 each. This is a $16 gain per round bale (without including the extra costs of the square baling operation).

*depending on the location and the demand

CH SX105 LM104 rebaler 4

2. Less labour required

A small square baler can be driven at only 3-4 mph while a large round baler can be driven up to 10 mph! Not to mention that picking up the small balls requires additional handling… 

You need a crew of about six to bale and stack ten acres of hay in one day. With round bales, three or four people could very easily cover 15 acres in one day. 

Rebaling can be a one-man operation if you wanted it to be. With a Hustler Ez Remote coupled to a 100% hydraulically-driven Hustler bale processor, you need only one tractor – the PTO is used to operate the baler while the hydraulics are used to operate the bale processor.

3. Beat Mother Nature

All producers know that harvesting hay can be a tricky business. In years when the weather is unpredictable, you may have only a few days to harvest all your hay fields and it is a true challenge to get the hay cut, dried, raked, and baled and into the barn before wet weather. 

Rebaling can be achieved any time of the year, during less busy periods or during winter when the demand for hay is high!

See it in Action

Product Customiser

Select the product, then options and accessories to create your enquiry.

Side Chute 5ft (Chainless)

Side Chute 5ft (Chainless)

The Chainless Side Chute deflects the hay into a trough or bunk.

Ez Remote Control

Ez Remote Control

Making rebaling easy, the remote control valve can be positioned within a 160-degree arc to suit individual operator preference and provides improved visibility of the feed flow into the baler. The control levers are mounted on an arm to keep the operator outside the dust zone.

Ez Remote Control

Ez Remote Control

Making rebaling easy, the remote control valve can be positioned within a 160-degree arc to suit individual operator preference and provides improved visibility of the feed flow into the baler. The control levers are mounted on an arm to keep the operator outside the dust zone.

Side Chute 5ft (Chainless)

Side Chute 5ft (Chainless)

The Chainless Side Chute deflects the hay into a trough or bunk.

Side Chute (Unrolla)

Side Chute (Unrolla)

Our new side chute attachment extends the feed drop point of your Unrolla chain bale feeder and will assist with feeding into troughs, bunks, along hot-wires, or up against head-bails for indoor feeding.

Ez Remote Control

Ez Remote Control

Making rebaling easy, the remote control valve can be positioned within a 160-degree arc to suit individual operator preference and provides improved visibility of the feed flow into the baler. The control levers are mounted on an arm to keep the operator outside the dust zone.

Ez Remote Control

Ez Remote Control

Making rebaling easy, the remote control valve can be positioned within a 160-degree arc to suit individual operator preference and provides improved visibility of the feed flow into the baler. The control levers are mounted on an arm to keep the operator outside the dust zone.

Side Chute (Unrolla)

Side Chute (Unrolla)

Our new side chute attachment extends the feed drop point of your Unrolla chain bale feeder and will assist with feeding into troughs, bunks, along hot-wires, or up against head-bails for indoor feeding.

Arm Length: 1.6m long | 5.2ft long
Unit weight: 15 kg | 33 lbs
Retrofit: Yes (may require mounting holes drilling on earlier model machines)
Hydraulic required: 1x set of double acting hydraulics
Hydraulic hose length: 6m long | 19.6ft long

Features & Benefits

CH SX105 LM104 rebaler 4

Dust free

Thanks to the 1.6m (5.2ft) long-mounted arm, the operator can control the levers being outside of the dust zone when rebaling  

Rebaling Calculator

Return On Investment Calculator

After unsuccessful attempts with other rebaling methods, most rebaling operations turn to Hustler for the optimum rebaling solution which helps them overcome many challenges:

  • Effectively teases the hay to mimic that “raked windrow” texture to minimize jammed balers and broken shear pins
  • Allows the operator to feed the baler consistently to produce uniform square bales
  • One tractor can run both the square baler and the rebaler
  • Preserves hay quality for longer
  • Substantially reduces handling time and cost
  • Eliminates hours of back-breaking labor or expensive equipment to collect small bales
  • Increases the value of your hay
  • Store the large bales and re-bale the small squares on demand or during winter
1 Number of Large Bales to Re-bale Per Year
2 Current Price of Large Bales $
3 Number of Small Squares per Large Bale

*Typically 20-22 small squares per round 5x6 bale, 16-18 small squares per 4x5 bale

4 Current Price of Small Square Bales $
5 Total Value of Large Bale After Re-baled into Small Squares
7 Number of re-baled large bales to pay for Hustler De-baler
8 Years to Pay off Hustler De-Baler

Download our free rebaling guide

Increase hay value by up to 3 times! In under 5 minutes, 15-20 small square bales can be converted from 1 large bale at a value of $4-6 each, that equates to $60-120 worth of small hay bales.

Download our free guide to find out more.

2022 Rebale Guide illustration

What our customers are saying

Newsletter Signup

Get Out There, in Hustler Country episodes and the latest news